18 Jun 2024
SABIC displays breakthrough solutions for energy storage and distribution at The Battery Show Europe 2024
SABIC, a global leader in the chemicals industry, is unveiling its newest thermoplastic solutions for batteries, electric vehicle (EV) technologies and energy storage here at The Battery Show Europe (Booth D10, Hall 8). They include a thermoplastic-metal DC-DC converter housing for EVs and a high-voltage battery pack enclosure. In these and many other applications, SABIC materials’ design freedom and high performance can help customers cut weight, reduce manufacturing complexity, enhance safety and extend service life.
4 Jun 2024
SABIC to feature at PCIM Europe first commercial application of ELCRES™ HTV150A film in capacitors
SABIC, a global leader in the chemical industry, will highlight at PCIM Europe 2024 (in Hall 7, Booth 140) the first commercial application of its high-heat ELCRES™ HTV150A dielectric film. Japan’s Nichicon Corporation used this ultra-thin specialty film to develop high-temperature, high-voltage, commercial-quality capacitors for AC-DC traction inverter modules in electric vehicles. This technological breakthrough addresses industry demand for advanced film capacitors which can enable more-efficient AC-DC power modules.
28 May 2024
SABIC’s versatile ULTEM™ resins, on display at AIX 2024, support recycling and sustainability goals
SABIC, a global leader in the chemical industry, is highlighting its broad and diverse portfolio of ULTEM™ materials at the 2024 Aircraft Interiors Expo (AIX). ULTEM resin, a polyetherimide (PEI), is adaptable to a wide range of formats, including foam, sheet, fiber, powder, and composite and honeycomb structures. Due to their versatility and desirable attributes, these resins offer the industry a smooth transition path from traditional thermosets to lighter, more environmentally cautious and more easily processed thermoplastics. At its exhibit (Stand #6C51B), the company is displaying aircraft applications that benefit from a variety of ULTEM materials, including interior parts, seating, lighting, structural elements, electrical components and composites.
13 May 2024
Primeur: ENGIE en Solarge plaatsen grootste circulaire zonne-installatie bij SABIC in Genk
ENGIE, Solarge en SABIC slaan de handen ineen voor een zonnepaneleninstallatie van 2,4 MWp op de site van SABIC in Genk. Uniek aan deze circulaire zonnepanelen is dat ze 100% recyclebaar zijn, veel minder wegen dan traditionele zonnepanelen én door Solarge in Nederland geproduceerd worden met SABIC-materialen.
9 May 2024
Specialized SABIC® PP-UMS foam resin can help reduce vehicle emissions and increase recyclability
SABIC, a global leader in the chemical industry, is spotlighting two diverse transportation applications that demonstrate the potential benefits of SABIC® PP-UMS (Polypropylene – Ultra Melt Strength) foam resin at NPE2024 (Booth #S19005). This distinctive material features high melt strength for outstanding foamability and enables the extrusion of PP foams with very low density, excellent impact resistance and compliance with VDA 278 emissions regulations. SABIC PP-UMS foam resin’s processing versatility allows PP foams, subject to user testing, to be used in structural cores for sandwich panels in delivery vans, trucks and recreational vehicles (RVs), and to provide structural and insulative properties in blow-molded air ducts. Examples of these applications, on display at the SABIC booth, illustrate the suitability of this foam resin for broad use in transportation components that can benefit from significant weight reduction and potential cost optimization.
8 May 2024
SABIC introduces VALOX™ HX325HP resin for high-precision diabetes management devices, offering excellent processability & chemical resistance
SABIC, a global leader in the chemicals industry, today announced the availability of VALOX™ HX325HP resin, a new high-performance, medical-grade, injection molding polybutylene terephthalate (PBT) resin. Developed especially for high-precision parts, such as components of insulin delivery pens, insulin pumps, auto-injectors and continuous glucose monitors, this new resin combines outstanding processability with high chemical resistance and validated biocompatibility. SABIC will be featuring VALOX HX325HP resin at NPE2024 and will display auto injectors as candidate applications for this material at its booth (#S19005).
7 May 2024
SABIC testing shows high potential of phase-change thermoplastics in preventing thermal runaway in EV batteries
SABIC, a global leader in the chemical industry, is reporting here at NPE2024 test results that underline the high potential of thermoplastic-based thermal runaway barrier solutions to help prevent fire spread in electric vehicle (EV) batteries. The SABIC sub-system level test series showed that a battery module box made from the company’s STAMAX™ 30YH570 long glass fiber polypropylene (PP) resin with intercellular thickness as low as 1mm has a potential to act as an effective thermal barrier solution by preventing thermal runaway propagation in 18650 cylindrical cells. It provides the necessary thermal insulation and flame resistance to reduce the chances of cell-to-cell propagation in a thermal runaway scenario and thus mitigate the risks of a catastrophic safety incident. This material in combination with compressible foams also has shown promising results to contain thermal runaway propagation in prismatic and pouch cells.
6 May 2024
NPE2024: SABIC showcasing progress in plastic innovation for a more sustainable future
SABIC, a global leader in the chemical industry, is highlighting at NPE2024 (Booth #S19005; May 6-10 at the Orange County Convention Center in Orlando, Florida) a wide range of solutions that demonstrate the value of plastics for a more sustainable future. Under the theme “Collaborating to Create the Future,” the company is presenting innovative solutions that are available today and others that are on their way to broader adoption. This includes examples of the company’s work with manufacturers and others across the value chain on circular plastic solutions available under its TRUCIRCLE™ program and new approaches with plastics under its BLUEHERO™ initiative that can help in the shift to electrification.
6 May 2024
SABIC NPE2024 press kit
SABIC (Booth S19005) is participating at NPE2024 under the theme “Collaborating to Create the Future”. With more than 55,000 leaders from over 110 countries representing every industry—from automotive to healthcare to consumer products to construction and more, NPE® is the largest plastics trade show in the Americas and one of the most innovative business events in the world.
1 May 2024
SABIC’S ULTEM™ resin in PEM water electrolyzer solutions can help advance the use of clean energy technology
SABIC, a global leader in the chemical industry, announced today that FE Tooling selected ULTEM™ resin to manufacture structural components used in PEMWE applications. The Chinese manufacturer chose ULTEM resin for the membrane electrode assembly (MEA) support film, bipolar plate frames and insulation boards because of its excellent properties, such as compressive strength, creep resistance, high modulus, hydro-stability in acids and low ion leaching. ULTEM resin can facilitate assembly and help enable reliable and safe long-term operation of the PEMWE system.
29 Apr 2024
SABIC and Cybershield team up to advance use of plated ULTEM™ resin in aircraft parts
SABIC, a global leader in the chemical industry, today announced its collaboration with Cybershield, Inc., a U.S. supplier of metalized plastic components, to advance the use of plated ULTEM™ resins in aerospace applications. Through this collaboration, which will be featured at the upcoming NPE2024 and the 2024 Aircraft Interiors Expo (AIX), SABIC’s team shared with Cybershield their extensive expertise on injection molding of high-heat ULTEM resins. This training prepared Cybershield for successfully molding ULTEM 2310 resin into backshells for electrical connectors that are well suited for use in used in audiovisual (AV) control modules for commercial aircraft.
23 Apr 2024
SABIC, Napco and FONTE have joined forces to launch first bread packaging made with fully recycled post-consumer plastic in KSA
SABIC, a global leader in the chemical industry, has announced the successful roll-out of the first circular packaging project in Saudi Arabia as part of its TRUCIRCLE™ program to accelerate the implementation of a circular plastic economy. FONTE, a major player of the bakery industry in the Kingdom of Saudi Arabia (KSA), has introduced bread bags made with SABIC’s certified circular polyethylene (PE) in their Oat Arabic Bread. The bags are made by Napco National, a vertically integrated Saudi manufacturer of flexible film and packaging products, using two food-contact certified circular polyethylene resin grades (LLDPE) from SABIC’s TRUCIRCLE portfolio. Following the kick-off of the joint project in March 2023 and successful completion of the trial phase at Napco, FONTE has started to introduce the flexible bags to stores throughout Saudi Arabia.
