19-11-2008
Press Kit China Array Medica 2008
China Array Plastics, a full-service specialty injection molder of high-performance thermoplastic materials, headquartered in Pittsfield, Mass. in the United States, is showcasing new high-end medical applications here at Medica 2008, in hall 16, booth E41.
19-11-2008
China Array Showcases High-End Thermoplastic Injection Molding Capabilities for Global Medical OEMs at Medica 2008
Düsseldorf, Germany – Nov. 19, 2008 – China Array Plastics, a full-service specialty injection molder of high-performance thermoplastic materials, headquartered in Pittsfield, Mass. in the United States, is showcasing new high-end medical applications here at Medica 2008, in hall 16, booth E41. Through state-of-the-art manufacturing capabilities at its facility in Wuhan, China, the company specializes in molding only the highest performance materials for global medical OEMs. These include polysulfone (PSU), polyetherimide (PEI), polyetheretherketone (PEEK) and polycarbonate (PC) resins, which are being increasing specified by medical device manufactures for their reliability and outstanding balance of properties in a broad range of demanding medical applications.
18-11-2008
Rapid Silencing System per avere un’ambiente di lavoro silenzioso
18 novembre 2008 – E’ introdotto sul mercato durante Fakuma 2008, uno dei prodotti che migliorerà l’ambiente di lavoro in molte aziende Rapid Silencing System (RSS) prodotto da Rapid Granulator AB, l’azienda svedese specializzata nel settore granulazione Con le sempre più stringenti normative europee e nazionali sul rumore, l’ RSS offre agli stampatori e ai costruttori un modo per adeguarsi con una soluzione semplice e innovativa.
17-11-2008
VALEO AND DSM ENGINEERING PLASTICS COLLABORATE ON INNOVATIVE TECHNOLOGIES TO REDUCE VEHICLES’ ENVIRONMENTAL IMPACT
DSM Engineering Plastics today announced the expansion of its longstanding partnership with French firm Valeo to develop enhanced technologies for reducing the environmental impact from vehicles. Valeo Engine Management Systems, a division of Valeo, is leveraging the superior performance and aesthetics of Arnite polybutylene terephthalate (PBT) and polybutylene terephthalate/polyethylene (PBT/PET) resins from DSM Engineering Plastics in several innovative engine systems: electronic throttle control (ETC) exhaust gas recirculation (EGR); and ignition systems. By replacing traditional materials with Arnite resins, Valeo is able to advance its market-leading engine management solutions and offer automakers new ways to enhance driving satisfaction while minimizing environmental implications.
12-11-2008
SABIC Innovative Plastics dà nuova vita alle vetrature per automobili grazie alla tecnologia Exatec* E900 Grafx che consente di ottenere grafiche moderne e di grande effetto
BERGEN OP ZOOM, Paesi Bassi – 12 novembre 2008 – Il potenziale grafico delle vetrature automobilistiche ha sempre tentato la creatività dei designer, che hanno considerato le vetrature come delle tele bianche su cui sbizzarrirsi. Oggi SABIC Innovative Plastics offre un approccio completamente nuovo alla decorazione delle vetrature in policarbonato, rendendo possibile la realizzazione di un design colorato fresco e innovativo, in armonia con i diversi stili del marchio. La tecnologia Exatec* E900 Grafx, che impiega la pellicola in policarbonato (PC) Lexan*, consente la creazione di colori, stili ed effetti unici ed esclusivi, come le vernici cromate e metallizzate per le carrozzerie, oggi tanto di moda. Agli OEM e ai fornitori diretti del settore automobilistico che si rivolgono a SABIC Innovative Plastics viene offerta la più vasta gamma possibile, i massimi standard qualitativi e un’innovazione senza pari a livello globale.
12-11-2008
Frost & Sullivan premia Songwon Industrial Co., Ltd.
Ulsan, Corea – 12 novembre, 2008 – Songwon Industrial Co. riceve il 2008 Frost & Sullivan Global Plastic Packaging Additives Market Growth Strategy Leadership Award, in riconoscimento dell’ eccellenza della sua strategia di crescita e della penetrazione di mercato che ne è conseguita.
10-11-2008
SilCool* TIG 210 BX thermal management grease from Momentive Performance Materials provides a reliable and cost-effective solution for automotive electronic applications.
LEVERKUSEN, GERMANY — NOVEMBER 6, 2008
Thermal management is becoming increasingly important for automotive electronics as under-the-hood temperatures continue to rise and the amount of electronics is growing. Hybrid cars are particularly affected. Engineers are looking for cost competitive thermal management solutions that can remove the heat from increasingly sensitive electronic components. Thermal greases are often considered but due to concerns about “bleed-out” and long term reliability, engineers may end up selecting higher cost options. Momentive Performance Materials recently introduced SilCool TIG 210 BX, a thermally conductive grease that provides “low bleed” and low thermal resistance for applications where thin bond lines are required. In addition to thermal conductivity (2.1 W/mK), this material offers stable performance, which is typically required for automotive applications, such as an engine control unit. The images (MPMPR025a) show the “low bleed” performance and the thermal shock stability of a 45° mounted test specimen.
07-11-2008
La nuova lastra Lexan* Thermoclear* di SABIC Innovative Plastics offre un isolamento termico superiore per le vetrature, consentendo ai clienti di ridurre i costi energetici
BERGEN OP ZOOM, Paesi Bassi – 7 novembre 2008 – Il costo del riscaldamento e del raffrescamento degli ambienti sta raggiungendo livelli senza precedenti, inducendo i costruttori a cercare nuove alternative per migliorare l’efficienza energetica degli edifici residenziali e commerciali. Una soluzione tradizionale consiste nell’installazione di finestre con vetrocamera. Questi vetri tuttavia, oltre a essere pesanti, fragili e difficili da installare, hanno proprietà di isolamento inferiori rispetto ai nuovi materiali. Per eliminare questi svantaggi, SABIC Innovative Plastics ha sviluppato una nuova lastra Lexan* Thermoclear* a 9 pareti, destinata ad applicazioni quali le vetrature piane di solarium, serre e lucernari, centri commerciali, edifici adibiti a uffici e fabbriche. Questa nuova soluzione di vetratura non solo aiuta i clienti a ridurre i costi di riscaldamento e raffrescamento degli ambienti, ma anche a limitare i consumi energetici e le emissioni di CO2, a tutto vantaggio dell’ambiente. I prodotti in lastra ad alte prestazioni Lexan Thermoclear di SABIC Innovative Plastics offrono all’industria dell’edilizia e delle costruzioni nuovi modi per soddisfare l’esigenza di una sempre maggiore efficienza energetica negli ambienti in cui si vive e si lavora.
