SABIC

Converters save time and energy as SABIC extends range of SABIC® PP Qrystal high clarity polypropylenes

Sittard, the Netherlands – May 29, 2012 – To meet the need of converters for materials that deliver better finished products and that can be produced cost-effectively, SABIC has developed two new high clarity SABIC® PP Qrystal polypropylenes. These random copolymers, typically for injection moulding, were specially designed with unique flow behavior, providing processors with the flexibility to produce parts faster and with lower energy consumption.

SABIC® PP QR674K, with a melt flow rate (MFR) of 40g/10min, was typically developed for more sensitive food contact applications, owing to its improved organoleptic performance (low odor). Typical target applications are caps and closures, houseware, kitchenware and food/non-food containers.

SABIC® PP QR678K, with its high MFR of 80 g/10 min, is better suited to production of parts with complex shapes and/or long and narrow flow paths. Customer trials have shown around 15% higher flow than a standard PP random at the same MFR level, allowing machines to run at lower processing temperatures and 15% faster cycle times, potentially decreasing production costs.

SABIC has a broad package of PP random copolymers that provide solutions for a wide range of applications, providing a combination of good transparency with lower conversion costs. The SABIC® PP Qrystal range, which was launched in 2010, now comprises four grades, with MFRs ranging from 25 to 80 g/10 min.

All SABIC® PP Qrystal grades can be processed at much lower temperatures than many other commonly used copolymer polypropylenes from the market, leading to significant reductions in cycle time and energy consumption, as a sustainable solution to decrease the molded article carbon footprint. They also have a good balance of impact strength and stiffness and enable customers to produce parts with no loss of transparency or aesthetics.

“When we started developing the SABIC® PP Qrystal range, we looked at how we could develop materials that not only yielded a better finished product, but which also enabled our direct customers, the injection moulding companies, to produce them as cost-effectively as possible,” says Ricardo Calumby, Technical Marketing Engineer PP at SABIC. “We have substantial technical resources in-house, but it is only by developing long-term relationships with our customers and listening to what they really want, that we can use expertise from both sides to channel those resources in exactly the right direction.

I think the launch of these new grades demonstrates that this cooperative process is working very well. We have best-in-class aesthetics that are achievable within a broadened processing window.”

The SABIC® PP Qrystal grade family is produced both in Europe and the Middle East and can be delivered globally.

At the international Plastpol 2012 trade fair in Kielce, Poland from 29 May to 1 June, SABIC® QR674K will be run at the stand of FERROMATIK MILACRON GmbH – G22. SABIC will be at Plastpol 2012 at Stand E-7.

Reader enquiries

SABIC
Europaboulevard 1
6135 LD Sittard
Netherlands
+31 46 722 2399
rachel.kundra@​sabic.com
www.sabic.com

Notes for editors


About SABIC

Saudi Basic Industries Corporation (SABIC) ranks among the world’s top petrochemical companies. The company is among the world’s market leaders in the production of polyethylene, polypropylene and other advanced thermoplastics, glycols, methanol and fertilizers.

SABIC recorded a net profit of SR 29.24 billion (US$ 7.80 billion) in 2011. Sales revenues for 2011 totaled SR 189.90 billion (US$ 50.64 billion). Total assets stood at SR 332.78 billion (US$ 88.74 billion) at the end of 2011.

SABIC’s businesses are grouped into Chemicals, Polymers, Performance Chemicals, Fertilizers, Metals and Innovative Plastics. SABIC has significant research resources with 17 dedicated Technology & Innovation facilities in Saudi Arabia, the USA, the Netherlands, Spain, Japan, India and South Korea. The company operates in more than 40 countries across the world with more than 33,000 employees worldwide.

SABIC manufactures on a global scale in Saudi Arabia, the Americas, Europe and Asia Pacific.

Headquartered in Riyadh, SABIC was founded in 1976 when the Saudi Arabian Government decided to use the hydrocarbon gases associated with its oil production as the principal feedstock for production of chemicals, polymers and fertilizers. The Saudi Arabian Government owns 70 percent of SABIC shares with the remaining 30 percent held by private investors in Saudi Arabia and other Gulf Cooperation Council countries.

Media Notes

• As an acronym, SABIC should be all caps whenever it appears in print.

• ® Trademark of SABIC

Related images

 

Editorial enquiries

Rachel Kundra
SABIC

+31 46 722 2399
rachel.kundra@​sabic.com

Kevin Noels
Marketing Solutions NV

+32 3 31 30 311
knoels@​marketing-solutions.com

 

 

Share

 

More news from