DSM Engineering Materials

GASTANK Sweden unveils zero permeation lightweight composite CNG cylinders manufactured with Akulon® Fuel Lock from DSM and HiPer-tex™ glass fibre from 3B

High pressure cylinders for motor vehicles that use Compressed Natural Gas (CNG) for their propulsion can now benefit from zero permeation, cost competitive, lightweight advanced materials.

Thanks to the unique combination of an inner liner made with Akulon® Fuel Lock from DSM and the superior mechanical characteristics of HiPer-tex™ high performance glass fibre from 3B, GASTANK Sweden AB, is now able to produce zero permeation cylinders that meet the very stringent ECE R110 regulation governing the use of Type IV high pressure CNG cylinders for motor vehicles.

Akulon Fuel Lock, based on high performance Akulon PA6, reduces evaporative emissions from engine fuel tanks by more than 99 percent, far exceeding EPA regulations. With grades for both injection and blow molding, this durable material facilitates the production of thin-wall designs, saving costs and improving productivity.

Professor Kurt Berglund, President GASTANK Sweden AB stated: “The combination of both Akulon Fuel Lock and HiPer-tex glass fibre enables optimizing the cost-benefit ratio of Type IV cylinders. HiPer-tex high performance fibres bridge the gap between heavy weight steel and high cost carbon fibre composites due to its ability to deliver a comprehensive range of properties economically whereas the newly developed cost effective Akulon Fuel Lock considerably reduces loss of gas through permeation.”

Berglund goes on to say: “Well recognized independent consulting Powertech Labs Inc. Canada did not detect any loss of gas via permeation in our newly developed Gastank™ 32, CNG tank with 32 litre capacity. This unprecedented result makes our lightweight, zero permeation composite CNG tanks a benchmark within the composite cylinder manufacturing industry.”

Eric Debondue, Business Development Leader at 3B added: “3B’s unique HiPer-tex glass formulation delivers a high level of performance in composite parts such as windblades, ballistic armour and high pressure vessels or pipes while ensuring sustainable economics. We are very proud at 3B to partner with GASTANK Sweden AB and DSM to develop an extremely reliable and durable CNG tank thanks to the high mechanical, fatigue and corrosion resistant properties of HiPer-tex fibre as well as the unique high barrier properties of Akulon Fuel Lock.”

Tim Vorage, Application Development Manager at DSM, adds: ”Our newly developed cost effective Akulon Fuel Lock not only shows a permeation factor at least 150 times lower than high density polyethelyne (HDPE), it also significantly limits creep under extreme temperatures at the cylinder’s neck thanks to a 50°C higher temperature resistance than HDPE. In addition, the ability to withstand higher temperatures allows a faster curing time of the composite material.”

CNG fuel systems equip approximately 2 million cars every year with as many as 4 tanks installed per vehicle. Some OEM’s offer CNG as an option, however many vehicles are retro-fitted and the use of CNG is expected to grow at 18% per year.

Reader Enquiries

DSM Engineering Materials
30 Pasir Panjang Road #13-31
Mapletree Business City
Singapore 117440
Singapore
www.dsm.com
@dsm
dsm
DSMcompany
dsmcompany

Notes for Editors


DSM - Bright Science. Brighter Living.™

Royal DSM N.V. is a global science-based company active in health, nutrition and materials. By connecting its unique competences in Life Sciences and Materials Sciences DSM is driving economic prosperity, environmental progress and social advances to create sustainable value for all stakeholders. DSM delivers innovative solutions that nourish, protect and improve performance in global markets such as food and dietary supplements, personal care, feed, pharmaceuticals, medical devices, automotive, paints, electrical and electronics, life protection, alternative energy and bio-based materials. DSM’s 22,000 employees deliver annual net sales of over €9 billion. The company is listed on NYSE Euronext. More information can be found at www.dsm.com.

About 3B-the fibreglass company

3B-the fibreglass company is a leading developer and supplier of fibreglass products and technologies for the reinforcement of thermoplastic and thermoset polymers. This dynamic and entrepreneurial company has two state-of-the-art fibreglass manufacturing facilities in Battice, Belgium and Birkeland, Norway as well as a dedicated R&D Centre located in the heart of Europe. 3B’s ambition is to be the thermoplastic reinforcement global leader, the wind energy solution provider and the business development partner for innovative composite applications. This growth agenda builds upon three strategic drivers that are sustainability, technological innovation and a global presence to most effectively service our international customers.

The company operates two unique eco-responsible and high performance glass technologies, Advantex® and HiPer-tex™. These two well established brands combine durability with eco-responsibility and versatility, making them the materials of choice for a wide range of industries. With a sound foundation of unique assets, 3B is committed to design reliable and durable fibreglass solutions available globally.

For more information visit our new website: www.3b-fibreglass.com.

About GASTANK Sweden AB

Gastank Sweden AB was quite recently founded, initially with Kurt Berglund's Company HFC Sweden AB as sole owner. Later on a Korean company also invested in partnership. The idea of Gastank Sweden AB is to produce and sell volume optimized gas tanks and systems for CNG and compressed biogas for cars. For more information, visit www.gastank.se.

Akulon® Fuel Lock is a registered trademark of Royal DSM N.V.

Advantex® is a registered trademark of Owens Corning used under license.

HiPer-tex™ is a trademark of 3B.

Gastank™ 32 is a trademark of Gastank Sweden AB

Related images

GASTANK Sweden unveils zero permeation lightweight composite CNG cylinders manufactured with Akulon® Fuel Lock from DSM and HiPer-tex™ glass fibre from 3B. (Photo: DSM Engineering Plastics: DSMPR327)

 

Editorial enquiries

Paula Wolfe
DSM Engineering Materials

+1 812 435 7539
Paula.wolfe@​dsm.com

 

Also available in

 

Share

 

More news from