27 Aug 2001
Honeywell Fluorine Products holds series of technical seminars on new generation blowing agent
As part of their ongoing commitment to customers and partners, Honeywell has conducted a series of European customer seminars on the development of HFC-245fa, their next generation blowing agent.
27 Aug 2001
Honeywell breaks ground on new fluorine products HFC-245fa plant, start up on track for 1 July, 2002
Honeywell announced that construction on its HFC-245fa manufacturing facility is on schedule for start-up July 1, 2002. On April 5, 2001 the company marked the groundbreaking of the facility with a customer-focused event.
27 Aug 2001
Honeywell’s HFC-245fa Commercialisation on Track and Available in Semi-Commercial Quantities
Honeywell Fluorine Products Europe is now making semi-commercial quantities of its next-generation blowing agent HFC-245fa available to the European foam industry for customer trials.
27 Aug 2001
Eastman Chemical Company shows full product range at K'2001
At K'2001 in Düsseldorf, Eastman Chemical Company, will demonstrate it’s full range of plastics resins for a number of industries, from automotive to telecommunications to packaging at booth number 5G03 in Hall 5.
24 Aug 2001
Three Rhodia Engineering Plastics sites ISO/TS 16949 certified
In a single audit operation by Det Norske Veritas (DNV), three Rhodia Engineering Plastics’ sites, in Saint-Fons, France, Ceriano Laghetto, Italy, and Gorzow, Poland, received the ISO/TS 16949 certification for the development, production and sales of TECHNYL® and TECHNYL-STAR™ polyamides. This certification has confirmed Rhodia Engineering Plastics’ commitment to the automotive industry, providing Rhodia’s automotive customers with the quality assurance specific to their demands.
24 Aug 2001
At the K, Mold-Masters® Announces German Capacity Increase, introduces New Controller & Nozzle
GEORGETOWN, Ontario, Canada (AUGUST, 2001) – At the Kunstoffe International Trade Fair for Plastics and Rubber (the “K” Show), 25 October - 1 November 1, 2001 in Düsseldorf, Germany, Mold-Masters Limited is announcing a new manufacturing expansion within Germany; new capabilities for its on-line Merlin® Hot-Runner Wizard; and two new products: a high capability multi-zone heat controller and an ultra-small, 1-piece cartridge heater nozzle. At the “K,” Mold-Masters® can be found in Hall 1, Stand 1 A 09.
23 Aug 2001
Process Control with Dynamic Feed from Synventive Molding Solutions
´s-Gravendeel, August 2001. – Synventive Molding Solutions launches Dynamic FeedTM, a unique and patented process control system. Dynamic FeedTM provides independent ‘real time’ process control of each gate. The degree of control is the same as having a separate injection unit at each gate. Each gate can have a different injection pressure, injection time, pack pressure and pack time. The injection and packing pressure profiles are independently controlled. Each nozzle of the hot runner is fitted with a flow control pin operated by a control valve, similar to standard valve gate assemblies. The variable position of the flow control pin will affect the flow rate to each cavity. Pressure is measured in each nozzle downstream of the flow control pin just prior to the melt entering each cavity. A PID controller is used to control the pin’s position based on the injection and packing profiles determined for each cavity.
21 Aug 2001
UK trade associations are committed to Interplas 2002
The UK plastics and rubber industry is giving its total backing and support to next year’s Interplas exhibition.
