L’agente espandente Honeywell Enovate® 3000 verrà impiegato dal produttore di coperture e rivestimenti britannico Steadman

HoneywellHaasrode, Belgio, 2 settembre 2004 – L’agente espandente Enovate® 3000 di Honeywell, un idrofluorocarburo liquido usato come agente espandente nelle schiume rigide da isolamento, da ora viene impiegato da Steadman & Son Ltd. per la produzione di pannelli isolanti in schiuma. Steadman, uno dei produttori britannici di impianti per la copertura e il rivestimento da più tempo nel settore, ha scelto Enovate® 3000 poiché, non danneggiando lo strato di ozono, è conforme a quanto disposto dal Protocollo di Montreal. Inoltre, il prodotto è ininfiammabile. Ciò significa che Enovate® risponde perfettamente agli standard relativi alla resistenza al fuoco imposti dal LPCB (Loss Prevention Certification Board), il comitato britannico, autonomo e riconosciuto, di certificazione della qualità per la prevenzione degli infortuni. Per quanto riguarda l’uso nei pannelli isolanti, Enovate® 3000 offre prestazioni superiori rispetto ai prodotti concorrenti.

Novamont buys Eastman’s Eastar Bio® technology

Eastman ChemicalNovamont S.p.A. and Eastman Chemical Company (NYSE:EMN) have announced the sale of Eastman’s Eastar Bio® copolyester business and technology platform to Novamont, a producer of biodegradable materials. Terms of the sale were not disclosed.

Univar and Texaco joint-venture partners close agreement for the supply of Dureal™

UnivarUnivar NV, the world’s largest distributor of chemical raw materials, and the joint venture partners of Texaco Netherlands have signed a declaration of intent for the installation of Dureal™ storage units and tank installations for AdBlue at the fuel service stations they operateand at companies who use on-site tank facilities.

Milliken Chemical and Domo PPC collaborate in developing an advanced benefit masterbatch for polypropylene

Milliken Chemical and Domo PPC collaborate in developing an advanced benefit masterbatch for polypropylene. Gent, Belgium – Following a year of technical collaboration with Milliken Chemical, the global leader in clarifying and colouring agents for polypropylene (PP), Domo Polypropylene Compounds (Domo PPC), has announced the launch of Tecnoline® P1-602-N2-N, an advanced nucleator masterbatch. Developed specifically to save the injection moulder time and money, Tecnoline P1-602-N2-N represents an important step forward in productivity enhancement.

GLCC LAUREL INCREASES SMOKE SUPPRESSANT AND SPECIALTY FLAME RETARDANT PRICES

Great LakesINDIANAPOLIS, INDIANA—GLCC Laurel, LLC today announced that the company will increase the global price for its smoke suppressant and specialty flame retardants product lines, where contracts allow, for shipments after September 15, 2004. The price will increase $.10 per lb. for zinc borate and ONGARD® 2 and ONCOR® 75RA smoke suppressants and $.20-$.30 per lb. for SMOKEBLOC® smoke suppressants.

DSM ENGINEERING PLASTICS PUNTA AL SETTORE FILI E CAVI CON GLI ELASTOMERI ARNITEL® TPE

DSM Engineering Plastics, unità aziendale appartenente alla divisione Performance Materials di DSM N.V. (Euronext Amsterdam: DSM), ha annunciato nuove iniziative nel settore dei materiali di rivestimento per fili e cavi. Oltre alla già affermata famiglia dei materiali elastomerici di rivestimento per fili in copolietere-estere e copoliestere-estere (COPE o TEEE) Arnitel®, oggi DSM sta sviluppando nuovi gradi per questo settore. Inoltre, l’attribuzione a Francis Aussems dell’incarico di Direttore del settore Sviluppo ed Assistenza Tecnica delle Applicazioni, incentrato in particolar modo sulle applicazioni relative ai fili, rappresenta una risorsa dedicata al settore fili e cavi. DSM Engineering Plastics, unità aziendale appartenente alla divisione Performance Materials di DSM N.V. (Euronext Amsterdam: DSM), ha annunciato nuove iniziative nel settore dei materiali di rivestimento per fili e cavi. Oltre alla già affermata famiglia dei materiali elastomerici per il rivestimento dei fili in copolietere-estere e copoliestere-estere (COPE o TEEE) Arnitel®, oggi DSM sta sviluppando nuovi gradi per questo settore. Inoltre, l’attribuzione a Francis Aussems dell’incarico di Direttore del settore Sviluppo ed Assistenza Tecnica delle Applicazioni, incentrato in particolar modo sulle applicazioni relative ai fili, rappresenta una risorsa dedicata per il settore fili e cavi.

Husky appoints Thomas Hartkämper General Manager Technical Centre Germany North

Effective September 1, 2004, Husky Injection Molding Systems has appointed Thomas Hartkämper General Manager of the company’s Technical Centre Germany North in Bad Salzuflen. Effective September 1, 2004, Husky Injection Molding Systems SA has appointed Thomas Hartkämper General Manager of the company’s Technical Centre Germany North in Bad Salzuflen.

Milliken Chemical to Exhibit at K-Show

Milliken & Company Milliken Chemical, a division of Milliken & Company, will be exhibiting at K-Show 2004, the world’s number one trade fair for plastics and rubber, October 20-27 in Düsseldorf, Germany in Hall 5, Stand F27.