06-06-2007
QUADRANT EPP LANZA MATERIALES DE NUEVA GENERACIÓN PARA LA FABRICACIÓN DE SEMICONDUCTORES
Tielt, Bélgica – Junio de 2007 – Dos nuevos materiales de Quadrant Engineering Plastic Products (Quadrant EPP), Semitron® CMP LL5 y Semitron® CMP XL20, abren la posibilidad de alargar la vida de producción de los componentes críticos en los procesos de planarización química y mecánica (CMP) de obleas de semiconductores. Estos dos materiales ofrecen una vida de servicio de cinco a veinte veces más larga que los materiales utilizados actualmente para fabricar los aros de retención que inmovilizan la oblea durante su planarización.
06-06-2007
QUADRANT EPP, CENTRADO EN EL DESARROLLO DE PRODUCTOS: DOS NUEVOS MATERIALES EN LA RECTA FINAL PARA EL 2008
Tielt, Bélgica – Augusto de 2007 – Además de otros productos que Quadrant Engineering Plastic Products (Quadrant EPP) presentará en la feria K 2007, la compañía también ha desarrollado una serie de productos nuevos destinados a ser comercializados en 2008. Dos grandes proyectos que se hallan actualmente en fase de test de mercado son las formas y componentes de poliimida (PI) y el film de PVDF como revestimiento para tejidos arquitectónicos exteriores.
06-06-2007
MUELLES DE TPE DE GRAN PRECISIÓN SUSTITUYEN A ELASTÓMEROS TERMOESTABLES EN TOPES FERROVIARIOSEL
Tielt, Bélgica – Junio de 2007 – Los elastómeros termoplásticos están sustituyendo a los aceros y cauchos convencionales en muelles de altas prestaciones utilizados en topes y órganos de choque y de tracción de material rodante. La firma alemana DUREL se halla a la vanguardia de esta tendencia y fabrica paquetes de muelles a partir de varillas y tubos suministrados por Quadrant Engineering Plastic Products (Quadrant EPP) en el elastómero de poliéter termoplástico (TPEE) de DSM Engineering Plastics, Arnitel®.
06-06-2007
UN NUEVO COMPUESTO TERMOPLÁSTICO DE QUADRANT EPP AÑADE A LAS VENTAJAS DE LOS PLÁSTICOS DE INGENIERÍA UN MAYOR NIVEL DE RESISTENCIA ESTRUCTURAL PARA SUSTITUIR METALES
Tielt, Bélgica – Junio de 2007 – Quadrant Engineering Plastic Products (Quadrant EPP) ha desarrollado una nueva tecnología para incorporar refuerzo de fibra de vidrio a las matrices de polímeros a fin de multiplicar la resistencia estructural de diversos plásticos de ingeniería en forma de hoja y de placa gruesa. Como consecuencia del aumento de rigidez que se puede conseguir así, los nuevos compuestos termoplásticos (TPC) extenderán las ventajas de los plásticos de ingeniería frente a los metales y a los termoestables a aplicaciones donde la resistencia estructural era hasta ahora una limitación, o donde el espesor de material necesario resultaba prohibitivo.
06-06-2007
QUADRANT EPP APUNTA ALTO CON NUEVAS FORMAS PREDETERMINADAS DE BAJA FRICCIÓN Y BAJO DESGASTE PARA JUNTAS Y COJINETES
Tielt, Bélgica – Junio de 2007 – El fabricante de formas predeterminadas Quadrant Engineering Plastic Products (Quadrant EPP) ha ampliado su gama Fluorosint® de formas exclusivas basadas en PTFE de altas prestaciones para mecanizar añadiendo un grado apto para entornos extremos y temperaturas comprendidas entre -240°C y +260°C.
06-06-2007
COMPOSITE SANDWICH PANELS PROVE IDEAL FOR BUILDING FORMWORK SYSTEMS
LENZBURG, SWITZERLAND – June, 2007 – Replacing plywood with high-performance composites may appear at first sight to be a prime case of over-engineering. But there is good reason to believe that a new formwork product from German company Hünnebeck, one of the world's top suppliers of formwork and scaffolding, will signal a paradigm shift in the industry.
06-06-2007
INJECTION MOULDED PASSENGER AIRBAG HOUSING FROM QUADRANT CMS SAVES WEIGHT AND COST
TIELT, BELGIUM – June, 2007 – Quadrant Creative Moulding & Systems (Quadrant CMS) of Tielt, Belgium, working in close co-operation with Tier-1 automotive supplier Autoliv, has developed a new, polyamide passenger airbag housing for use in vehicles based on the Volkswagen Golf platform. The housing, moulded from impact-modified polyamide 6 with 40 percent glass-fibre reinforcement, is just under half the weight of the original metal counterpart and provides considerable cost-of-manufacture savings. The part is being installed in vehicles such as the VW Golf, Audi A3, Seat Leon and Skoda Fabia since early 2007.
06-06-2007
VORWERK GROUP PARTNERS WITH QUADRANT CMS FOR FUNCTIONALLY AESTHETIC VACUUM HOSE MODULE
TIELT, BELGIUM – June, 2007 – True to its vision of delivering a combination of product development, production and assembly from a single source, Quadrant Creative Moulding & Systems (Quadrant CMS) in Tielt, Belgium, has partnered German vacuum cleaner manufacturer Vorwerk in the design and manufacture of a new polymer-based vacuum hose module. The part, included on Vorwerk’s new “Tiger” vacuum cleaner which was launched globally in early 2007, delivers improvements in terms of functionality, handling and aesthetics.
