23-05-2011
BELDEN ADDS THE OZD PROFI G12 ATEX 1 DEVICE TO ITS HIRSCHMANN™ RANGE OF PRODUCTS
Belden has now launched the Hirschmann™ OZD Profi G12 ATEX , Profibus FO repeaters certified for use in hazardous locations, zones 1, 2, 21 and 22. The optical ports are intrinsically safe and have got op-is approval. With a transfer rate of up to 12 Mbps, the repeater is available with a stainless steel or plastic housing. The optical function module, which has its own Ex approval, is also available without a housing. This enables it to be installed in the same housing as other components, so saving valuable space. The optical performance of the FO repeater can be continuously monitored using signal strength outputs which can be integrated in the process control system. As the Hirschmann™ OZD Profi G12 ATEX 1 repeaters also support ring redundancy, it is now possible to implement highly available Profibus networks using ring or line topologies in potentially explosive environments such as those found in the oil and gas sectors and in some areas of the food industry.
20-05-2011
First All-Plastic Front-end Module on Chinese-developed Vehicle Using SABIC Innovative Plastics’ STAMAX® Polypropylene Resin Featured at Shanghai Auto Show
SHANGHAI, China – May 20, 2011 – The first Chinese-developed model vehicle with an all-plastic front-end module (FEM) using SABIC Innovative Plastics’ STAMAX® long glass fiber polypropylene (LGFPP) resin was displayed at the recently concluded 14th annual Shanghai Auto Show. Chang’an Automobile Co., one of China’s largest automakers, featured the all-plastic FEM at the show in a stripped down version of its CX30 model. This major application uses STAMAX LGFPP resin from SABIC Innovative Plastics to replace steel, cutting part weight by up to 40 percent and total vehicle weight by about four kilograms. In addition to weight reduction for improved fuel economy and lower emissions, the all-plastic FEM solution reduces overall system costs for Chang’an by enabling modular assembly for improved efficiency on its production line. This recent work with Chang’an illustrates SABIC Innovative Plastics’ ability to support automotive OEMs as they strive to develop lighter vehicles for improved fuel economy and lower emissions, while also lowering overall costs.
19-05-2011
Songwon annuncia un aumento di prezzi globale per la sua gamma di additivi per materie plastiche
Ulsan, Corea – 19 maggio 2011 – Songwon Industrial, leader globale nello sviluppo e nella produzione di additivi per polimeri, aumenterà globalmente i suoi prezzi per gli antiossidanti Songnox®, gli stabilizzanti UV Songlight® e Songsorb®, gli antiacidi Songstab™ e per la sua gamma di antiossidanti amminici, tra l’15 e il 20%, a valere dagli ordini fatturati a partire o successivamente al 1 giugno 2011, fatti salvi gli accordi contrattuali. Questo incremento di prezzi è necessario per compensare gli aumenti dei costi delle materie prime e per garantire la continuità degli investimenti nell’affidabilità delle forniture.
19-05-2011
DSM e Interfloat stipulano accordi di licenza e fornitura per KhepriCoat™, tecnologia di rivestimento ad elevata trasmissione/antiriflesso di DSM
DSM Advanced Surfaces ha firmato in data odierna degli accordi di licenza e fornitura con Interfloat Corporation — società leader nella produzione di vetro solare — che consentiranno a quest’ultima di iniziare la produzione di vetro protettivo per i moduli fotovoltaici rivestiti di KhepriCoat™, la soluzione ad elevata trasmissione/antiriflesso (AR) prodotta da DSM Advanced Surfaces che continua a registrare successi da record.
19-05-2011
La nuova Range Rover Evoque si fa paladina della sostenibilità con l'aiuto dei materiali leggeri di SABIC
GUANGZHOU, Cina – 19 maggio 2011 – Presso lo stand SABIC (n. 10.2E21) della fiera internazionale Chinaplas 2011 tutti i riflettori sono puntati sulla nuova Range Rover Evoque, che mette in evidenza i vantaggi dei materiali leggeri ed ecologici della business unit Innovative Plastics di SABIC. Questa nuova cross coupé di lusso, caratterizzata da dimensioni compatte e tecnologie avanzate, viene descritta da Land Rover come un "passo avanti nella riduzione delle emissioni di CO2". L'utilizzo dei materiali di Innovative Plastics, assieme a un design efficace e alla cura dei dettagli, ha contribuito a una riduzione globale del peso del modello Evoque pari al 35 percento rispetto al modello Range Rover Sport 2010 di Land Rover. La collaborazione tra Innovative Plastics, Land Rover e i suoi fornitori principali dimostra i vantaggi apportati dall'impiego di materiali termoplastici leggeri e ad alte prestazioni per soddisfare i requisiti normativi globali, così come le aspettative dei clienti in merito a un ridotto impatto ambientale.
19-05-2011
Pallmann opens office in Spain
Zweibrücken, Germany (May 19, 2011) – Size reduction technology specialist Pallmann Group plans to provide improved advice and service for its rapidly growing customer base in Spain and Portugal with the establishment of its first subsidiary in the region.
18-05-2011
GE Healthcare Performance Solutions Expands Global Leadership Team; Appoints New Managing Principal in UK
BUC, FRANCE – May 18, 2011 – GE Healthcare today announced the appointment of Andy Ward as Managing Principal, GE Healthcare Performance Solutions, United Kingdom (UK). In this role, Ward will be responsible for leading the growth for Performance Solutions, primarily within the UK healthcare sector. Ward’s reputation and expertise of transformational change in healthcare will be invaluable as he looks to strengthen partnerships with hospitals and health systems to better improve their overall performance.
18-05-2011
SABIC annuncia l'aumento della capacità di produzione del policarbonato in Asia a sostegno del percorso di forte crescita della regione
GUANGZHOU, Cina – 18 maggio 2011 – L'unità aziendale strategica Innovative Plastics di SABIC annuncia oggi al Chinaplas 2011, stand 10.2E21, che aggiungerà nuove linee di produzione a Shanghai e a Nansha, in Cina, per le resine e le pellicole Lexan* in policarbonato (PC) rinomate a livello mondiale. Queste aggiunte fanno parte della strategia aziendale a sostegno della crescita dinamica di settori chiave delle materie plastiche in questa regione, quali il settore dell'elettronica di consumo, quello elettrico, solare, della sicurezza e automobilistico. Con un'esperienza di oltre 80 anni di conquiste nel campo della tecnologia avanzata, Innovative Plastics continua ad essere leader nel settore delle materie plastiche con il suo fiore all'occhiello, il policarbonato (PC). L'azienda sviluppa incessantemente nuove particolari soluzioni per il materiale Lexan al fine di soddisfare le sfide tecnologiche, ambientali, prestazionali e normative.
