13-07-2007
MEETING THE CHALLENGES OF HIGH HEAT RESINS
At K 2007, DSM Engineering Plastics will demonstrate how its portfolio of materials can lead to significant system cost reductions in comparison to high heat resins such as PPA, PPS, PEI and PEEK. Key examples include Arnite XL for automotive lighting applications and Akulon Ultraflow for automotive interior. Stanyl PA46 also often allows for a reduction in system costs and/or to optimize designs thanks to its unmatched stiffness at high temperatures and the extreme good fatigue resistance.
12-07-2007
ROHM AND HAAS INTRODUCES NEW VISIONPAD™ PRODUCTS FOR ADVANCED CMP APPLICATIONS
SHANGHAI — July 12, 2007 — Rohm and Haas Electronic Materials, CMP Technologies, a leader and innovator in chemical mechanical planarization (CMP) technology for the global semiconductor industry, today introduced two additions to its VisionPad™ platform of CMP polishing pads, both offering world-class defectivity performance, exceptional planarization levels and extended product lifetime.
12-07-2007
Borealis and Borouge at K 2007
Borealis and Borouge, leading providers of innovative, value creating plastic solutions, will showcase exciting new developments at K 2007. Customers from the entire value chain are invited to their high profile stand, C58 in Hall 6 at the Düsseldorf Trade Fair Centre. This is the world’s most renowned exhibition for the plastics industry and the two companies will present unique materials for the infrastructure, automotive, and advanced packaging markets.
12-07-2007
Borealis and Borouge at K 2007
Borealis and Borouge, leading providers of innovative, value creating plastic solutions, will showcase exciting new developments at K 2007. Customers from the entire value chain are invited to their high profile stand, C58 in Hall 6 at the Düsseldorf Trade Fair Centre. This is the world’s most renowned exhibition for the plastics industry and the two companies will present unique materials for the infrastructure, automotive, and advanced packaging markets.
10-07-2007
CHEMTURA ADDS MORE VALUE WITH WIDE RANGE OF PRODUCTS AT K- SHOW, 17TH INTERNATIONAL PLASTICS TRADE FAIR IN DÜSSELDORF
Chemtura Corporation will exhibit their extensive line of new and existing flame retardants, antioxidants, UV stabilizers, polymerization additives and intermediates for vinyl, polyolefins and other plastics at K-Show, the 17th International Trade Fair for Plastics & Rubber. K 2007 will take place October 24-31 in Düsseldorf, Germany.
09-07-2007
QUADRANT CMS INTRODUCEERT GEPATENTEERDE THIN FILM FLUOROPOLYMEER TECHNOLOGIE (TFFT) IN EUROPA
TIELT, BELGIË – juli 2007 – Quadrant Creative Moulding & Systems (Quadrant CMS) komt met een gepatenteerde nieuwe technologie, waarmee een dunne laag PTFE via een eenstaps-overmouldproces aan een thermoplastische drager kan worden gehecht. Dit levert een product op dat beschikt over de optimale wrijvingseigenschappen en chemische weerstand van het fluoropolymeer, maar ook over de mechanische sterkte van de thermoplastische drager eronder. Bovendien biedt het product het voordeel van spuitgiet-onderdelen: klantspecifieke ontwerpvrijheid.
09-07-2007
NEW HIGH FLOW AND HIGH PRODUCTIVITY MATERIALS FROM DSM
DSM Engineering Plastics has introduced a range of High Flow & High Productivity materials, which enable significant system cost reductions, when compared to standard resins. Added value for the customer is generated by these materials via shorter production cycles leading to lower processing costs per part, greater design freedom leading to lower material and/or processing costs per part and more room for innovation, such as metal replacement. To demonstrate the potential for cost reduction and annual savings, DSM Engineering Plastics is able to provide customers with Product Cost Analysis spreadsheet tools.
06-07-2007
QUADRANT CMS TO DOUBLE HUNGARIAN PRODUCTION BY END OF 2007
TIELT, BELGIUM – July 2007 – Quadrant Creative Moulding & Systems (Quadrant CMS) is about to double the turnover at the Hungarian facility compared to 2006 and has announced plans to further increase the production capacity significantly of its purpose-built injection-moulding facility in Szigetszentmiklos, south of Budapest, by the end of 2007. Production at the plant has increased significantly in recent months, principally as a result of Quadrant CMS’ success in the region. Amongst Quadrant CMS’s expansion plans are the addition of Krauss-Maffei and Engel injection moulding machines, ranging from 25 to 400 tons, and the employment of more workers at the site in line with the additional activity.
