2 Jan 2006

Spring wins the TNT Master 'Feed the Hungry' Award

Spring Global MailAmsterdam, January 2006 - Cees Degeling (Distribution Development Manager at Spring CHO in Amsterdam) and three other project leaders of TPG Post have been awarded the TNT Master Award 'Feed the Hungry 2005 for its innovation and creativity, professional project management and hands-on support of the Flourishing Schools Project, a year-long project initiated by World Food Programme (WFP) Mozambique and TNT Post.

English

23 Dec 2005

UTECH Europe 2006: First Point of Call for latest Polyurethane Industry Trends

Product designers, specifiers and other key decision makers keen to keep right up-to-date with the latest advances in polyurethanes materials, processing equipment and techniques, should be sure not to miss the world’s No.1 polyurethanes forum: UTECH Europe to be held 28-30 March 2006 in Maastricht, HollandProduct designers, specifiers and other key decision makers keen to keep right up-to-date with the latest advances in polyurethanes materials, processing equipment and techniques, should be sure not to miss the world’s No.1 polyurethanes forum: UTECH Europe to be held 28-30 March 2006 in Maastricht, Holland.

English Deutsch Français Italiano Español

21 Dec 2005

杜邦高性能彈性體有限公司成立新的上海技術中心以滿足區域增長的需要

Dupont Performance Elastomers杜邦高性能彈性體有限公司近日成立了位於上海張江高科技園區的技術中心，為世界最快速增長的彈性體市場中的客戶提供支援。

繁體中文 简体中文

21 Dec 2005

MOLYKOTE®脫模噴霧劑提高加工速度，便於清潔

Dow Corning - Molykote美國密歇根州，米德蘭 - 2005年12月21日—— 道康寧新近推出Molykote®脫模噴霧劑，它是一種獲得NSF H1認證的有機矽脫模劑，幫助產品從食品機械部件上脫離，從而提高產品表面品質，使清潔更為方便，成本更為低廉。

繁體中文 简体中文

19 Dec 2005

DSM further expands US production capacity for Dyneema®, the world’s strongest fiber

Mooring ropes with Dyneema® for large vesselsDSM, the largest manufacturer of high performance polyethylene (HPPE) fiber in the world, today announces its decision to make another investment in a new production line for Dyneema® fiber in Greenville, North Carolina (USA). It is the third announcement this year of new Dyneema® fiber production lines at DSM’s Greenville site, following earlier decisions to build two additional fiber lines and one Dyneema® UD (UniDirectional bullet resistant sheet) line.

English

15 Dec 2005

Borealis to promote range of healthcare solutions at PHARMtech Congress

Polyolefins for healthcare from BorealisBorealis, the leading supplier of plastics solutions for healthcare applications in Europe, will demonstrate a comprehensive range of polyolefin healthcare solutions at the Central & Eastern European PHARMtech Congress 2006 taking place on February 22-23 in Poland. The complete spectrum of healthcare products and solutions will be featured in Expo XXI Warsaw International Expocentre, Poland.

English Polski

13 Dec 2005

GE Expands Global Application Technology Center Capabilities with Special Equipment for Molding and Thermoforming Large Parts

GE - Plastics invests in KM2700 ton injection compression molding machine to help customers save time and resources in product development On December 7th, Golnar Motaharipour, President of GE - Plastics, Europe and Josef Märtl, Chief Executive Officer Krauss-Maffei, unveiled a state-of-the-art Krauss- Maffei 2700 ton injection compression molding machine at GE's Global Application Technology Center in Bergen op Zoom, The Netherlands. GE's investment will save customers time and resources in product development, while helping GE - Plastics to create and test new materials that address customer needs for lighter materials and greater design flexibility in large parts.The new MX machine series is a further development of Krauss-Maffei's highly successful MC machine series. GE - Plastics resins to be molded using the KM2700 inlcude Noryl GTX* resins for fenders, Xenoy* resins for body panels, and Lexan* GLX resins for automotive glazing, plus a new line of high modulus ductile (HMD) materials that feature propietary nano-filler technology. These HMD materials offer the potential to reduce gaps in automotive body panels through increased stiffness and lower coefficient of thermal expansionBERGEN OP ZOOM, THE NETHERLANDS — December 13, 2005 — At an open house, GE - Plastics announced a major new enhancement to its Global Application Technology Center here that will enable the development of new materials for large parts such as exterior automotive body panels and glazing. GE’s investment in a state-of-the-art Krauss-Maffei 2700 MX injection compression molding machine will help the company address customer needs for lighter materials and greater design flexibility in large parts. The KM2700 machine is the latest in an array of technology capabilities and services - ranging from design to processing to analysis - offered through six centers of excellence within the Global Application Technology Center. In addition to the Krauss-Maffei molding machine, GE plans to install a new thermoforming machine with twin sheet capacity at the Bergen op Zoom facility in early 2006.

English Deutsch Français Italiano Español Nederlands

12 Dec 2005

BeldenCDT and Scion Technology: Ultimate performance and Cost effective solution for all formats of video

UK company Scion Technology has developed a technology which incorporates BeldenCDT’s range of ‘low skew’ VideoTwist cables, which conform to all network cable standards for CAT5e (Belden P/No. 7988R) and CAT6 (Belden P/No 7989R) hi-speed computer networkingUK company Scion Technology has developed a technology which incorporates BeldenCDT’s range of ‘low skew’ VideoTwist cables, which conform to all network cable standards for CAT5e (Belden P/No. 7988R) and CAT6 (Belden P/No 7989R) hi-speed computer networking.

English